GRRN Forums
May 25, 2013, 08:15:05 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: You can keep track of the Gun Rights Radio Network on Facebook.
 
   Home   Help Login Register  
GRRN Forums > Network Podcasts > Reloading Radio (Moderator: Jim Fleming) > Anybody reload for a .30 carbine?
Pages: 1 [2]   Go Down
« previous next »
  Print  
Author Topic: Anybody reload for a .30 carbine?  (Read 1673 times)
0 Members and 1 Guest are viewing this topic.
IHMSA 40x40
Newbie

Offline Offline

Posts: 27



WWW
« Reply #20 on: April 09, 2011, 04:21:17 PM »
The .30 Carbine isn't a straight wall case, it's a tapered case. Using a carbide sizing die is what's causing that ring. Nothing wrong with it, kind of like using a small base die, but it will shorten your case life. As for powder, H-110/Win 296 is the way to go. Those two are the same exact powder so load data is interchangable. Go with the 110 FMJ bullet for general shooting. Speer's 110 grain hollowpoint is great for small game and has the same outside profile as the FMJ and feeds great.
Logged
U. S. Air Force veteran
NRA Patron Member
CRPA Life Member
IHMSA Life Member
USCCA Platinum Member
My 1st Amendment rights don't end at the entrance of a building or at a city or state line so why does my 2nd?
GRRN Forums
« Reply #20 on: April 09, 2011, 04:21:17 PM »
 Logged
cornmastah
Supporter
Hero Member
*
Offline Offline

Posts: 513
« Reply #21 on: April 11, 2011, 02:11:46 AM »
The dummy rounds I made chambered and ejected fine.  I will go ahead and test some loads this weekend, weather permitting.
« Last Edit: April 11, 2011, 10:02:24 PM by cornmastah » Logged
I shoot... therefore I reload.
GRRN Forums
« Reply #21 on: April 11, 2011, 02:11:46 AM »
 Logged
cornmastah
Supporter
Hero Member
*
Offline Offline

Posts: 513
« Reply #22 on: April 19, 2011, 02:00:50 PM »
I tested about 50 rounds of reloads and they worked very well.  No issues with feeding or ejecting.  One thing I noticed on the instructions for the carbide .30 carbine dies is that even though they are carbide dies, they recommend using lube on every fifth brass casing when resizing.
Logged
I shoot... therefore I reload.
hobartfloyt
Supporter
Full Member
*
Offline Offline

Posts: 235
« Reply #23 on: April 19, 2011, 04:36:39 PM »
Outstanding!
I have a carbon steel die, so I *have* to lube the cases. I will run them through the tumbler again after resizing to get any remaining lube residue off before priming.

Art - Florida
Logged
Guns don't kill people. What kills people are bullets going really, really fast.
GRRN Forums
« Reply #23 on: April 19, 2011, 04:36:39 PM »
Announcement: Mag 40 Benefit Auction - Kathryn L. Jones Cancer Relief Fund
 Logged
Jim Fleming
Moderator
Hero Member
*
Offline Offline

Posts: 709


This is me in a Weapons Training Class, 2001.


Jim Fleming
« Reply #24 on: April 19, 2011, 06:41:01 PM »
good job, Corn.

Quote from: cornmastah on April 19, 2011, 02:00:50 PM
I tested about 50 rounds of reloads and they worked very well.  No issues with feeding or ejecting.  One thing I noticed on the instructions for the carbide .30 carbine dies is that even though they are carbide dies, they recommend using lube on every fifth brass casing when resizing.
Logged
Take Care,

Jim Fleming

I will bleed, Red, White, & Blue forever.
USAFR (Retired)
NRA Life Member
VFW Life Member
Facebook: http://facebook.com/​Jim.Fleming1953
Devereaux
Supporter
Hero Member
*
Offline Offline

Posts: 2996


We Didn't Lose - We Left
« Reply #25 on: July 22, 2011, 09:49:34 AM »
Old thread. But I was reading it and wondering how things turned out. ?What was the source of all the brass.

I was struck by the observation that the ring was only partially around the case. I have seen cases with some dies that show a small "bulge" at the base, but it is generally all the way around, AND the case passed a case checking die (I use them regularly, based on old experience with Super reloading for IPSC. Kept you from having feeding problems).

ANYWAY, the thought occurred to me that perhaps the chamber was unsupported at the feed ramp area, allowing for a little case bulging. ?Maybe.
Logged
"Being ready is not what matters. What matters is winning after you get there."
LtGen Victor H. Krulak, USMC
April 1965
Pages: 1 [2]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines
SMFAds for Free Forums 		Valid XHTML 1.0! Valid CSS!
anything